Majestic Villawood Herringbone Outdoor Wood Burning Fireplace

The Majestic Villawood Outdoor Wood Burning Fireplace with Herringbone Refractory brings the warmth, sound and visual appeal of a real wood fire to patios, outdoor rooms and covered entertaining areas. Available as the 36-inch ODVILLA-36H-B and the 42-inch ODVILLA-42H-B, each model combines a low-profile open-hearth design with a distinctive herringbone brick interior that gives the firebox a custom masonry-inspired appearance.

The Villawood provides a wide, unobstructed view of the flames. Stainless steel mesh curtain screens help control sparks while preserving the open view and should remain closed whenever wood is burning.

The included herringbone refractory system consists of a hearth panel, back panel and separate left and right side panels. The angled brick pattern creates more visual detail than a standard stacked-brick interior while helping contain and reflect heat within the firebox. The fireplace must never be operated without the approved refractory properly installed. Hairline cracks and normal discoloration can occur with use, but damaged panels should be replaced if they crumble, expose the metal firebox or develop cracks wider than 1/4 inch.

Standard equipment also includes a factory-approved steel grate, two stainless steel mesh curtain screens, dual gas-line knockouts and a standard dual cooling-air system. 

This fireplace is tested as a decorative outdoor fireplace and should not be considered a primary heating source. It must not be used for cooking or warming food. Overfiring, burning trash, loading excessive amounts of wood or using gasoline, charcoal lighter fluid or other flammable liquids can damage the fireplace and chimney and create a serious fire hazard.

Optional ODVGF-36 and ODVGF-42 bi-fold glass doors are available for the corresponding fireplace sizes. When installed, the doors must be operated either fully open or fully closed. Partially open doors can disrupt the chimney draft and draw smoke or flames toward the fireplace opening.

Professional installation is required. Before the first fire, the installer must verify the framing, clearances, hearth extension, protective strips, cooling-air system, refractory, grate, mesh screens, chimney joints, supports, firestops, flashing and termination. The first three or four fires should be moderate to allow the paint and refractory materials to cure gradually. The chimney should be inspected and cleaned at least twice during the heating season or as recommended by a certified chimney sweep.

Disclaimer: Product specifications, dimensions, framing and cutout requirements, hearth construction, clearances, cooling-air requirements, chimney configurations, termination details, moisture-management provisions, finishing instructions, gas-log compatibility and accessory information are provided for general planning purposes and may change. Local codes, site conditions and the selected chase, hearth, chimney and finishing design may require different materials, components or dimensions. Always verify all technical information and follow the current Majestic or Outdoor Lifestyles installation manual, owner’s manual and instructions supplied with the chimney, hearth, drain pan, doors and other accessories before purchasing, framing, finishing, installing or operating the fireplace.