Napoleon Vector 74-inch See-Thru Direct Vent Natural Gas Fireplace

The Napoleon Vector 74-inch See-Thru Direct Vent Natural Gas Fireplace creates an expansive contemporary fire presentation that can be enjoyed from two adjoining spaces. Designed as a see-through built-in fireplace, it is ideal for room dividers, open-concept interiors, and other installations where a single fireplace can visually connect multiple living areas. The natural gas burner operates from 30,000 to 48,000 BTUs, providing adjustable flame and heat output across the wide linear firebox.

A tube-style burner with flame and heat adjustment produces a clean linear flame pattern, while included MIRRO-FLAME™ porcelain reflective radiant panels enhance the depth and movement of the fire. Heat-radiating ceramic glass provides a clear view from both sides, and included black premium safety barriers help reduce the risk of accidental contact with the hot viewing surfaces.

Fireplace operation is handled through Napoleon's ProFlame II control system, eFIRE Bluetooth® controller, and included remote control. The remote provides six flame-height settings, while the eFIRE mobile app provides convenient control of compatible fireplace functions from a mobile device, including on/off operation, flame height, and ember bed lighting.

The electronic ignition system incorporates Napoleon's Pilot-on-Demand technology with both Intermittent Pilot Ignition (IPI) and Continuous Pilot Ignition (CPI). CPI mode is designed to assist fireplace startup during colder conditions, while an integrated seven-day timer automatically shuts the pilot off after an extended period without fireplace use. A battery backup control system also allows essential on/off and flame-height functions to remain available during a household power outage.

The see-through configuration uses firebox glass on both sides of the appliance. One side is designated as the access side and can be identified by the pilot location, while the opposite side has a fixed glass door. The fixed side is part of the sealed fireplace system and is intended to remain in place during normal owner maintenance.

The fireplace uses a top 5-inch exhaust / 8-inch air intake direct vent system. For the see-through appliance configuration, the fireplace measures approximately 89.3125 inches wide × 41.1875 inches high × 16.1875 inches deep, with a 76.75-inch finishing flange width and an approximately 18.625-inch-high fireplace opening. Standard see-through framing requires approximately 89.8125 inches of framing width × 16.1875 inches of framing depth, with a minimum enclosure height of approximately 91 inches. The fireplace does not need to be elevated above the floor, although final framing and enclosure requirements depend on the selected venting, finishing, and heat-management configuration.

Disclaimer: A compatible decorative media configuration is required to complete the fireplace. Additional venting, finishing, conversion, heat-management, or installation components may be required depending on the application. Technical information, dimensions, framing requirements, clearances, venting requirements, accessory compatibility, and specifications are subject to change. Always refer to the current Napoleon owner's manual and installation manual for complete requirements before installation, operation, or service.

**LV62 & LV74 Requires 4 week lead time**